Copying a 0-byte, 1,000,000 block LMFS file (or not, as the case may be)
This initial attempt to copy the 1,000,000 block (but 0 length) LMFS failed and needed to be ABORTed. Note the BAND-TRANSFER error…
Showing the machine configuration with a Seagate ST336918N formatted to its maximum size and with an otherwise empty FEP filesyste…
Showing a 28M block FEPfs installed on a size-limited ST336918N. Size was limited with sg_format --resize --count=28000000
Showing a 20M block FEPfs on a size-limited SCSI disk
Screenshot showing a dual-SCSI2SD and one HDD installation with two CD-ROMs configured on the second SCSI2SD. Bonus memory error c…
Screenshot showing a memory error correction message, plus the detail from the log. This happens a few times a week.
Close up of the bottom left of the Symbolics 3600 keys
Close up of Bottom Right keys of the Symbolics 3600 keyboard
Detail of the Symbolics logo on the Consoleo
Another detail of the Symbolics logo on the console, with glare from the macro ring flash
Close-up of the logo from a Symbolics 3600 keyboard, at the top left
This shows the top part of the XL1201 VMEbus backplane with the various connections. Gray: SCSI Blue: ESDI? MFM? ST-506? Molex 4-…
The XL1201 Backplane's SCSI connector has one broken SCSI pin (#1, a ground) and a broken left side. It seems to work adequately d…
Here are the FEP files in the tests directory on the clean Genera 8.3 disk from DKS
Here are the FEP files in the patches directory on the clean Genera 8.3 disk from DKS
Here are the FEP files in the root directory on the clean Genera 8.3 disk from DKS
Booted from a clean drive from DKS, the XL1201 shows this herald